TM
Instruction manual
“Copyright 2015, Phoenix Professional Audio GmbH, www.phoenix-pa.com“
Phoenix logo is registered at the German Patent- and Trademark Office (TM)
All brands are property of their respective owners.
22.
SETTINGS IN AUTOMATIC SYSTEM (DSDF)
The
PV-DSP-1AD.9.2
(third generation) has a digital automatic (
DSDF),
DIGITAL SIGNAL DELAY FIELD s
ystem, that means an
automatic connection of the recorded microphones with automatic control of the input with
BARRIER-GATE, GATE-OPEN and
GAIN-CONTROL.
The system (DSDF) is based upon the measurement of the stronger wanted signal by the temporary signal delay (
SIGNAL-DELAY
TIME
) principle.
IMPORTANT:
All DIP switches are located in the interior of the amplifier. For the hardware configuration please open the small cover which is
located in the upper part of the amplifier´s cover.
The illustration shows p
rogrammer No. 1 w
ith position of the DIP switches „
ALL INPUTS
“ are managed by the automatic system
[
OFF-position of the
DIP switch
]
.
The illustration shows p
rogrammer No. 1
with position of the DIP switches „
ALL INPUTS
“ are excluded from the automatic sys-
tem. The selective choice of the inputs for
AUTOMATIC ON/OFF
is of course possible [
ON-position of the
DIP switch].
Useful information:
With programmer No. 1 the automatic function of the mixer can be adjusted activated (p
osition OFF
) or deactivated (p
osition
ON)
. If f.i. channel 1 programmer-1 @ switch 1) shall be used as LINE input, it is senseful to deactivate the automatic function of
the mixer there, f.i. to reach a better recording quality with RECORDING.
Upon delivery of the amplifier all input channels are defined as automatic, the programmer-1 switches are in position OFF.
IMPORTANTT:
If the amplifier or the priorities shall be adjusted or used in conference mode, the respective channels have to be set to [
OFF
]
by programmer 1 (upper DIP position,
AUTOMATIC ACTIVE
).
With the
PROGRAMMER-1
switch block the automatic function of the mixer each input channel 1 to 8 can be
activated (p
os.
OFF, not tilted
) or
deactivated (p
os. ON, tilted downwards
), when f.i. the input is used as LINE input and shall be taken into
operation without automatic. In the front side of the amplifier, all channels excluded from the automatic system are shown by
the green LED (
IMPORTANT: a
nd each according to the setting in
PROGRAMMER-4
the last recorded channel).
DESCRIPTION PROGRAMMER 1 (AUTOMATIC ON/OFF)
Summary of Contents for PowerVoice PV-DSP-1AD.9.2
Page 41: ......