TM
Instruction manual
“Copyright 2015, Phoenix Professional Audio GmbH, www.phoenix-pa.com“
Phoenix logo is registered at the German Patent- and Trademark Office (TM)
All brands are property of their respective owners.
38.
Speaker outputs, groundless:
100 V - 70 V - 50 V - 8 and 4 Ohm, 1 x separate 100V output „SPK-ZONE-LEVEL“ with 6 level control
Automatic system:
DSP version:
Frequency response:
Unweighted signal-to-noise ratio:
Harmonic distortion:
Equalization parametric EQ @ input:
Feedback limiter:
DSP outputs/audio matrix:
Inputs:
DIGITAL SIGNAL DELAY FIELD with BARRIER-GATE, GATE-OPEN, GAIN-CONTROL system
Line outputs (process DSP):
LIMITER:
Delay:
Phantom power:
ANALOGUE/DIGITAL GAIN system:
Tone controls inputs:
Protective circuits:
Power-on delay, current limiting, abnormal temperature protection, limiter
DSP1 system
40 Hz to 22.000 Hz @-3dB
-90 dB to -24 dB@ NOISE GATE/ ON software setting
< 0,1 %
15 x 20 Hz - 20 kHz, (+/- 12 dB) @ 0.05 oct - 3.00 oct
Automatic feedback suppressor in the range 20 Hz bis 20 kHz or digital frequency shifter (shift 1,7 Hz, 2 Hz, 3 Hz.)
MIX-OUT with MAINSUM-2 output, POST MASTER, PRE-MASTER
8 x Mic.-line, (-40 dB to -15 db), 1.6 k
Ω
or LINE (-15 dB to +5 dB), 10 k
Ω.
1 line CH-9
no
Limiter (-24 dB to +6 dB)
shiftable in the range of 0,0 to 170 mtr. (499,92 ms)
24 VDC, shiftable to each input (channels 1 to 8), DIP-1
for all MIC-LINE inputs, analogue at the rear side, digitally in the device´s configurator
LOW 100 Hz, HIGH 10 kHz, (+/- 12 dB)
19“- width, 483 mm (W) x 135 mm- 3 U (H) x 340 mm (D), in the range -5
o
C to +40
o
C
Dimensions/temperature range:
Weight:
approx. 12 kg
PV-DSP-1AD.9.2 (200W)
Power supply:
230V/AC@ 50/60 Hz
Specifications
no
Equalization parametric EQ @ output:
DSP signal matrix:
MIX-OUT
Audio expander compressor:
shiftable to each input (channels 1 to 8 with bypass. Only „C“-versions)
yes, priority for all 8 input channels free programmable by DIP programmer
Conference configuration/priority:
Audio switching matrix:
MIX OUT [MAINSUM-1, MAINSUM-2]
GAIN control:
SUB filter:
no
PEQ filter/input PEQ:
PEAKING, LoSH 6 dB, LoSH 12 dB, HiSh 6 dB,HiSh 12 dB
PEQ filter/output PEQ:
no
PRESETS:
2 PRESETS with clear text
PRESETS:
no
Input low cut filter:
shiftable to each input (channels 1 to 8), DIP-3
Input sensitivity LINE & MIC.:
shiftable to each input (channels 1 to 8), DIP-2
LC display:
multifunctional graphic display
USB interface:
USB-MASTER interface
PRESETS interface:
no
230V/DC mains LINK:
no
Programming software:
MWL-CONTROL 1.0b for DSP-1 systems
Colour:
graphite
digitally in the DSP core
443 mm
335 mm
ROOM EQUALIZATION (BASICS)
Summary of Contents for PowerVoice PV-DSP-1AD.9.2
Page 41: ......