![background image](http://html1.mh-extra.com/html/phoenix/powervoice-pv-dsp-1ad-9-2/powervoice-pv-dsp-1ad-9-2_instruction-manual_1551264014.webp)
TM
Instruction manual
CONNECTIONS OF THE AMPLIFIER
1. 230VAC INPUT BUSH
IEC socket for connection to the 230VAC mains supply with glass fuse.
2. RJ-45 REMOTE CONTROL INPUT
Remote control input (control panel), optional device. Is used for manual remote selection of the presets 1 and 2.
3. RELAY CONTROL PANEL (INFO OUT PRESET-2)
Floating contacts with automatic shift by the preset-2 position. Is used for intrusion of an additional speaker line with preset-2
selection, like f.i. when programming the amplifier for the Sunday mass, Christmas „church is full“ for PRESET-2 program sequence.
4. MIX OUT (audio matrix output MAINSUM-2)
The
MIX-OUT o
utput is constructed balanced with signal routing for input 9 (
LINE, CD
) and all inputs 1 to 8, which are allocated
by programmer No. 3 (
MAINSUM-2
) and programmer No. 2 (
MAINSUM-1
) inputs.
Besides this, the position of the programmer No. 4 affects the output MIX-OUT as follows:
OUT2 PRE/POST GATE (switch No. 1@programmer No. 4)
Position (ab
ove
)
OFF,
all input channels allocated by the programmer-3 (
MAINSUM-2
) are standard routed according to the
automatic system and MASTER slide control.
POST-GATE position
.
Position (below)
ON,
all input channels allocated by the programmer No. 3 (
MAINSUM-2
) are routed before the automatic
system and MASTER slide control.
PRE-GATE position
.
5. LINE OUT (POST MASTER OUT/ MAINSUM-1)
Transformer-balanced linear (after EQ and Master) output LINE (0 dB).
6. LINE OUT (PRE MASTER OUT)
Transformer-balanced linear (before EQ and Master) output LINE (0 dB).
13.
“Copyright 2015, Phoenix Professional Audio GmbH, www.phoenix-pa.com“
Phoenix logo is registered at the German Patent- and Trademark Office (TM)
All brands are property of their respective owners.
1
2
3
5
7
8
9
10
11
12
13
14 15
4
Summary of Contents for PowerVoice PV-DSP-1AD.9.2
Page 41: ......