Ver. Phoenix 1.3 _ 01-09-2017
- 17 -
Phoenix Mixer India Pvt. Ltd.
TURN ON MACHINE (Connect to power) :
Note: The door will not open until the Gyro 525/600/1014 mixer is connected to the building power.
o
Ensure the Emergency push button is engaged – push to engage if necessary
o
Plug the mixer into the appropriate electrical receptacle. Ensure the circuit breaker on the left
hand side the mixer, near the top rear corner, is ON.
CAN LOADING:
1.
Open the Gyro 525/600/1014 Mixer door to its fully open position.
2.
Ensure the Can Holder Assembly is in the vertical, top dead center (TDC) position, with the
Clamp Mechanical Mechanism at the top.
3.
Referring to the illustrations, open the Can Clamping Bracket as follows:
o
Take up the Clamping bracket assembly fully by pressing Handle for clamping bracket as
shown in picture
o
Position the can on the bottom Disc. Using the concentric rings on the Bottom Disc as a
guide, ensure the can is properly centered.
