![background image](http://html.mh-extra.com/html/phoenix/gyro-1014/gyro-1014_operating-and-service-manual_1551257016.webp)
Ver. Phoenix 1.3 _ 01-09-2017
- 16 -
Phoenix Mixer India Pvt. Ltd.
8. OPERATIONS
Put the Single adapter for 1, 4, 10 ltrs. Can on the Bottom disc (23). Place the Can on the groove area
of the adapter. For Cans of 20 ltrs, place the Can directly on the bottom disc.
Set the Fine clamping lever (18) of the Clamping bracket (16) in the de-clamp position.
Turn the two keys of the Locking Plastic (12) in anti clockwise direction in order to de-clamp the
clamping bracket.
Press the Handle for Clamping Bracket (9) downward by holding the clamping bracket so that it
slides between the Guide Shafts (15).
Slide down and press it on the top of the can and then release the Handle for Clamping Bracket.
Now turn the two keys of the Locking Plastic (12) in clockwise direction in order to clamp the
clamping bracket.
To put some extra pressure on the can, fix the Fine clamping lever to the Plug for fine clamping
lever (10).
Close the Shutter (3) properly.
Set the time required to shake the can depending on the can size by rotating the Mechanical timer
(1) on the front panel of the machine. This will start the machine.
The machine will stop automatically after the time cycle is over. In case of Emergency press the
Emergency Push Button (2) on the front panel to stop the machine.
When machine stops running completely, open the Shutter and remove the Can.
Internal Assembly :
15
7
16
13
23
12
9
10
17
8
18
14