Ver. Phoenix 1.3 _ 01-09-2017
- 18 -
Phoenix Mixer India Pvt. Ltd.
o
Clamped the Clamping bracket assembly by pressing Handle for clamping bracket down.
o
Rotate Lock for clamping assembly in clockwise direction to tight the Clamping bracket
Assembly
o
For fine clamping of the can rotate and engaged the Fine clamping lever in clock wise..
o
Close the Shutter to the fully closed position.
MIXING:
Mechanical Timer:
o
Set the desired mix time by turning the knob on the Mechanical timer to the appropriate
position.
o
Gyro will spin for the set time to mix the Paint.
Once the set time has expired, Gyro Assembly will come to a stop.
To STOP the mixer during an emergency situation, push the Emergency push button. The door will
unlock.
USE THE EMERCENCY PUSH BUTTON IN AN EMERGENCY SITUATION ONLY
Note:
Always remove the can from the mixer after the mix cycle has been completed. Follow the
UNLOADING instructions below.
UNLOADING THE CAN:
1.
Open the Gyro 525/600/1014 Mixer Shutter to its fully open position.
2.
Rotate the Assembly to the vertical, top dead center (TDC) position, with the Handle for
clamping Bracket mechanism at the top.
