Phoenix Mecano Komponenten AG
5
2
General information
2.1
Notes on these assembly instructions
These assembly instructions are only applicable for the electric cylinder described and intended as documentation for the manufacturer
of the final product, into which this incomplete machine will be installed.
We herewith particularly emphasize that the operating instruction containing description of all functions and safety notes for the final
product must be compiled for the end customer by the manufacturer of the final product.
This also applies to the installation into a machine. The machine manufacturer is responsible for the respective safety equipment, inspec-
tions, documentation and monitoring of pinch and shear points that may potentially arise.
This assembly instructions help
•
avoid hazards
•
and downtime,
•
and guarantee and / or extend the lifetime of the product.
Hazard warnings, safety recommendations and data in these assembly instructions shall be adhered to with no exception.
The assembly instructions must be read and used by each person, who works with the product.
Setting into operation is forbidden until it is established that the machine complies with the provisions of the EC Guidelines 2006/42/EC
(Machinery Directive). It must comply with the CE guidelines prior to marketing, including with regard to documentation.
We expressly draw the attention of the re-user of this incomplete machine / partial machine / machine part to the duty of extension and
complementation of this documentation. In particular, a CE Declaration of Conformity must be drawn up by the re-user in case of fitting or
mounting of electric elements and/or drives.
Our Installation Declaration will automatically become void.
