Phoenix Mecano Komponenten AG
23
Put on a standard socket wrench (plug-in bolt 6 mm).
A standard ratchet or cordless screwdriver can be used to help ad-
just the drive (pushrod is driven in or out).
Please ensure that a maximum speed of rotation of
150
1/min
is NOT exceeded!
Exceedance would drive the motor to strongly so that it
would work as a generator and induce voltage in the built-in control
system. That would brake the motor and in some circumstances
cause electronic components to “come to life” on the control print.
Make sure that the end-positions (
retracted = installation length
and
extended = installation stroke length
) are NOT ex-
ceeded (Table: 6.7.3) by repeatedly measuring the installation
length with a standard tape measure or folding rule!
After you have released the drive from the application and removed it, take
off the socket wrench again (nut) and screw on the pressure equalizing ele-
ment again.
Hand
tighten the pressure equalizing element back on using an open-end /
ring spanner.
