2
3
Contents
page
General Information.
.......................................................................................................
2
Designated Use.......
........................................................................................................
3
Prerequisites.......
............................................................................................................
3
Getting to Know the System
............................................................................................
3
Fitting.....
..........................................................................................................................
6
Operation...................................
......................................................................................
11
...............................................................................
12
Maintenance and Repairs................
Type Label....................
...................................................................................................
13
Troubleshooting
...............................................................................................................
14
Cleaning and Care............
..............................................................................................
15
Declaration of Incorporation, EU Declaration of Conformity, Additional information
.......
16
General Information
These instructions are intended for the manufacturer of the end product
and are not
designed for passing on to the operator of the end product. With regard to the specialist
information contained herein, these instructions can well serve as a basis for drawing up the
instructions for the end products.
It is essential to note the information contained in these instructions!
In doing so, you
can prevent mistakes being made in installing or connecting the system which could result in
Ÿ
injury and accidents as well as
Ÿ
damage
to the drive system or the end product.
Use only DewertOkin drive control units!
The DewertOkin drive control unit incorporate an earth-free circuit which is isolated from the
supply mains by reinforced insulation or double insulation.
DewertOkin
accepts no liability
for damage caused as a result of …
Ÿ
non-observance of these instructions,
Ÿ
alterations to the product not approved by DewertOkin or ...
Ÿ
the use of spare parts not manufactured or approved by DewertOkin- these may
not ensure adequate safety!
Due to the policy of ongoing product improvement, DewertOkin reserves the right to carry
out technical changes at any time without prior notification!
1. Designated Use
The
MEGAMAT 4
drive system is
designed for installing in end products
…
Ÿ
for the motorized adjustment of movable furniture parts
using suitable fittings/
mountings or mechanics
.
The
MEGAMAT 4
drive system is
not intended for use
...
Ÿ
in an environment where
inflammable
or
explosive
gases or vapours
(e.g. anaesthetics) are likely to occur,
Ÿ
in a damp environment, i.e. outdoor,
Ÿ
in appliances used by small children or fragile persons,
Ÿ
in the immediate vicinity of young children.
2.
Prerequisites
The installation steps descriped in these instructions must be performed by a
suitable
qualified
or
trained person
.
Ÿ
This being the case, you should never carry out this work by
yourself
unless you
are a
suitable trained person
or
Ÿ
you should
entrust
this work to a
suitable qualified, skilled or trained person
only
.
Conformity in accordance with EC Directives
The drive system is supplied ex factory as a
machine not ready for use
in accordance with
the EC "Machinery" Directive. In other words, you may not put the drive system into
operation until you have met the
safety
objectives of the "Machinery” Directive and issued a
corresponding
Declaration of Conformity
!
The drive system with DewertOkin controls meets the safety objectives of the EC Directives
concerning "
Low Voltage
" and "
Electromagnetic Compatibility (EMC)
".
The drive is
not a medical product
if you install it into a medical device, manufacture in
conformity
with the EC Directive for "Medical Products" or other regulations it is the
responsibility of the
manufacturer of the end product
. For this purpose, DewertOkin has
additionally applied, fully or partially, a number of standards from the medical products
sector, in order
to facilitate
use in medical products (see page 18, Additional Information).
3.
Getting to Know the System
The
MEGAMAT 4
drive system is intended for the German market and complies with the
Law applicable in Germany in implementation of relevant EC Directives.
With regard to other variation options contact your after-sales service or take a look at the
current catalogue. We will be happy to assist you with any special requests you may have.
MEGAMAT 4
03/2020
ID 59400 9.0
03/2020
ID 59400 9.0