16
17
Declaration of Incorporation
According to Appendix II of the EU Machinery Directive 2006/42/EC
The manufacturer:
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Deutschland - Germany
declares that the incomplete machines described below
1)
MEGAMAT MEZ, MEGAMAT ME(n)
complies with the following basic requirements of the Machinery Directive (2006/42/EC):
Sections:
1.1.3; 1.3.3; 1.3.4; 1.3.7; 1.5.1; 1.5.2; 1.5.5; 1.5.6; 1.5.7; 1.5.8; 1.5.9; 1.5.10; 1.5.13
You may only operate this incomplete machine after you have confirmed that the end product
(into which this machine will be installed) complies with the Machinery Directive 2006/42/EC.
On reasonable request, the manufacturer is obliged to send the special documentation
accompanying the partially completed machinery in electronic form to the appropriate
national institution. The special technical documents corresponding to the machine have
been created according to Appendix VII, part B.
For preparation of the technical documentation is authorized:
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Tel.: 05223 979-0
Deutschland - Germany
Kirchlengern, Germany 24 March 2020
Dr.-Ing. Josef G. Groß
Geschäftsführer / Managing Director
1)
(n) stands for 1 - 5
EU Declaration of Conformity
In compliance with Appendix IV of the EMC-Directive 2014/30/EU
In compliance with Appendix IV of the LVD-Directive 2014/35/EU
In compliance with Appendix VI of the EU RoHS Directive 2011/65/EU (incl. Commission
delegated Directive (EU) 2015/863)
The manufacturer:
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Deutschland - Germany
declares that the following product
with DewertOkin Control Unit
1)
MEGAMAT MEZ, MEGAMAT ME(n)
meets the requirements of the following EU directives:
Electromagnetic Compatibility Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
COMMISSION DELEGATED DIRECTIVE (EU) 2015/863 of 31 March 2015 amending
Annex II to Directive 2011/65/EU of the European Parliament and of the Council as
regards the list of restricted substances.
Applied standards:
EN 60335-1:2012/A11:2014
EN 55014-1:2006/A1:2009/A2:2011
EN 55014-2:1997/A1:2001/A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62233:2008
This declaration of conformity is no longer valid if constructional changes are made which
significantly change the drive system (i.e., which influence the technical specifications found
in the instructions or the intended use)!
Kirchlengern, Germany 24 March 2020
Dr.-Ing. Josef G. Groß
Managing Director
1)
(n) stands for 1 - 5
MEGAMAT 4
03/2020
ID 59400 9.0
03/2020
ID 59400 9.0