THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
2
Starting up the printer
2.1
Unpacking and setup
Scope of supply
–
Printer
–
P
ower cable (Euro and US)
–
USB cable
–
WLAN stick
–
Empty film core (possibly already mounted on the take-up hub)
–
Label roll EML (20X8)R/TL
–
THERMOMARK RIBBON 110/50 ink ribbon
–
Data medium with driver and the CLIP PROJECT advanced software. The data medi-
um also contains this user manual in several languages
–
User manual in German and English
Unpacking
•
Check the device for damage which may have occurred during transport.
•
Retain the original packaging for subsequent transport.
Requirements for the installation location
•
Place the device on a level surface.
Removing the transportation safeguards
•
Open the cover.
•
Remove the foam transportation safeguards near the printheads.
•
Retain the transportation safeguard for subsequent transport.
NOTE: Damage to the device
Only operate the device in dry locations that are protected from spray and as dust-free as
possible. Protect the device and media from humidity, damp, and dirt. Do not expose the
device to direct sunlight.
