THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
2.3.3
Connecting a printer via WLAN
Installing a WLAN stick
Figure 2-3
Installing a WLAN stick
•
Remove the cover (1) with the Allen key (2).
•
Insert the WLAN stick into the USB interface on the right of the display.
Setting up the WLAN connection
•
Activate the WLAN interface via the menu (see page 21).
•
Select Access Point. The search for available access points starts. The available ac-
cess points, including hidden access points, are shown on the display.
•
Select the access point. To use a hidden access point, enter its SSID.
•
Assign the addresses (DHCP or IP address, subnet mask and gateway).
When you configure a WLAN connection via the website, do not change the "IP" and
"Gateway" parameters. Otherwise the connection with the printer will be lost.
•
For protected networks, the network key is requested. Enter the network key. The con-
nection is established. Network name and IP address are displayed.
2.3.4
Connecting a printer via Ethernet
To connect a printer via the Ethernet interface, use a cable with RJ45 plugs for 10Base-T or
100Base-T. Always use a shielded cable.
•
Connect the printer to a network socket or a computer.
•
Set up the Ethernet interface via the menu (see page 21).
When you configure a WLAN connection via the website, do not change the "IP" and
"Gateway" parameters. Otherwise the connection with the printer will be lost.
2
1
