THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
2.4.2
Inserting Leporello labels
Figure 2-5
Media feed path with Leporello labels
Inserting Leporello labels
•
Open the cover.
•
Release the margin stop (1). To do this, turn the green adjustable ring counterclockwise
until the arrow points to the
symbol.
•
Position the margin stop in such a way that the media fits between the two margin stops.
•
Place the label stack behind the printer. Make sure that the media side to be printed is
facing upwards.
•
Guide the Leporello labels over the holder for the media roll
•
Check the position of the margin stop. The media must make contact on both sides
without getting clamped.
•
Clamp down the margin stop. To do this, turn the adjustable ring clockwise until the ar-
row points to the
symbol.
Loading media into the
printhead
•
To lift the printhead, turn the green lever (2) counterclockwise.
•
Turn the red knurled screw (3) until the media fits between the red guides.
•
Push the media toward the printing unit.
•
Move the guides close to the edges of the media. The print media must not get stuck,
however.
•
Close the printhead.
2
3
1
