Phoenix Contact PSR-CT Series, Operating Instructions Manual, Page: 26 / 69

PSR-CT
26 / 69
PHOENIX CONTACT 108366_en_01
3 Mounting
3.1 Positioning and distances
Figure 3-1 Transponder field of the sensor
Tip : for safety switches with fixcode or unicode evaluation, perform teaching before
mounting.
Observe the orientation of the arrows on the sensor and actuator in order to ensure the
following:
– Permissible actuation position according to illustration (A, B, C, D)
– Alignment of the sensor and actuator without center offset
See Section “Actuation positions and travel directions” on page 23.
The side lobes of the transponder field may influence the response behavior of the sensor
depending on the actuation position and travel direction.
• In order to avoid influence of the side lobes, observe the specified minimum dis-
tances between sensor and actuator.
18
26
-26
-22
-18
Z
X
14
Y
-2
-6
-10
-26
-30
6
10
14
22
26
30
2
14
2
6
2
10
6
22
-14
-18
-22
10
18