Phoenix Contact 2986229, User Manual, Page: 57 / 102

SAFECONF configuration software
103503_en_03 PHOENIX CONTACT
4-7
ESPE The ESPE (electrosensitive protective equipment) safe
functional block monitors the switching states of
electrosensitive protective equipment (e.g., light grids). When
the protective equipment is triggered, i.e., the light grid beam
is interrupted, the enable signal at output OUT is set to
FALSE.
GuardLocking The GuardLocking safe functional block supports the
monitoring of a guard with guard locking (safety door
monitoring with four-state interlocking according to
DIN EN 1088).
GuardMonitoring The GuardMonitoring safe functional block monitors a guard
(e.g., safety door) with two-state interlocking according to
DIN EN 1088.
ModeSelector The ModeSelector functional block evaluates the states of a
mode selector switch with up to five positions.
A mechanical mode selector switch can be used, for example,
to set a specific safety level (e.g., service mode, setup mode,
cleaning mode, etc.) for operation of the safe application.
Table 4-1 Safe functional blocks (Fortsetzung)
Name
Icon in editor
Short description