Phoenix Contact 2702171 User Manual Download Page 72

Page: 72 / 78

AXL F SSDO8/3 1F

PHOENIX CONTACT

106888_en_01

A 3

Startup and parameterization

Checklist for startup and parameterization of the module

Device type/equipment identification

Version: HW/FW

Date

Editor

Test engineer

Comment

No. Requirement (mandatory)

Yes

Comment

Was startup completed according to the specifications (specifications

from the planning phase or according to the user manual)?

During startup, is it ensured that any person starting hazardous

movements intentionally can only do so with a direct view of the danger

zone?

Are all parameters parameterized for the outputs and is the

F_WD_Time set correctly?

For outputs that are parameterized for two-channel operation, are both

channels parameterized correctly for each other?

Are the output test pulses parameterized according to the actuator to be

connected?

Has the switch-off delay for stop category 1 been observed in the

calculation of the total response time for the machine/system?

No. Requirement (optional)

Yes

Comment

Have safety distances that must be observed been calculated

according to the response and delay times implemented?

Date

Signature (editor)

Date

Signature (test engineer)

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for 2702171















































































Search results

Summary of Contents for 2702171

Reviews:

Phoenix Contact 2702171, User Manual, Page: 72 / 78

Search results

Summary of Contents for 2702171

Reviews: