Phoenix Contact 2702171 User Manual Download

Page: 63 / 78

Technical data and ordering data

106888_en_01

PHOENIX CONTACT

10 Technical data and ordering data

10.1

SafetyBridge system data

For the system data for the SafetyBridge system, please refer to the documentation for the

logic module.

10.2

AXL F SSDO8/3 1F

SafetyBridge

Processing time of the module

1.5 ms

General data

Housing dimensions (width x height x depth)

53.6 mm x 126.1 mm x 54 mm

Weight (with connectors)

220 g, approximately

Operating mode

SafetyBridge

Process data mode with 4 words

Ambient temperature

Operation

-35°C to +60°C (any mounting position)

Storage/transport:

-40°C to +85°C

Humidity

Operation

75% on average, 85% occasionally

Storage/transport:

75% on average, 85% occasionally

Air pressure

Operation

70 kPa to 108 kPa (up to 3000 m above sea level)

Storage/transport:

66 kPa to 108 kPa (up to 3500 m above sea level)

Degree of protection

IP20; operation in at least IP54 installation space

Housing material

Plastic PBT, self-extinguishing (V0)

Air clearances and creepage distances

According to IEC 60439-1, derived from IEC 60664-1

Protection class

III (PELV), IEC 61140, EN 61140, VDE 0140-1

Gases that may endanger functions according to DIN 40046-36,

DIN 40046-37

Not resistant to gas that may endanger functions (sulfur dioxide (SO

hydrogen sulfide (H

S))

Resistance of the housing material to fungal decay

Resistant

Ambient compatibility

Not resistant to organic chlorine compounds

Measures against increased humidity must be taken.

For a short period, slight condensation may appear on the outside of the housing.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for 2702171















































































Search results

Summary of Contents for 2702171

Reviews:

Related manuals for 2702171

Brands by name

Popular brands

Phoenix Contact 2702171, User Manual

Search results

Summary of Contents for 2702171

Reviews:

Related manuals for 2702171

Brands by name

Popular brands