Phoenix Contact 2702171 User Manual Download

Page: 61 / 78

Maintenance, repair, decommissioning, and disposal

106888_en_01

PHOENIX CONTACT

Maintenance, repair, decommissioning, and disposal

9.1

Maintenance

The module does not require maintenance. Depending on the application and connected

I/O devices, the function of the I/O devices and the safety chain must be tested regularly.

The duration of use of the module is 20 years, or 25 years with a low demand rate.

Repeat testing during this time is not required.

•

Carry out maintenance on connected I/O devices (e.g., light grid) according to the

manufacturer specifications.

9.2

Repair

It is prohibited for the user to carry out repair work or make modifications to the module. The

housing must not be opened. The module is protected against tampering by means of

security labels. The security label is damaged in the event of unauthorized repairs or

opening of the housing. In this case, the correct operation of the safety module can no

longer be ensured.

•

In the event of an error, send the module to Phoenix Contact or contact

Phoenix Contact immediately and engage a service engineer.

9.3

Decommissioning and disposal

Carry out decommissioning according to the requirements of the machine or system

manufacturer.

When decommissioning the system or parts of the system, ensure the following for the

modules used:

Fate of the module

Measure

The modules will continue to be used

correctly.

Observe the storage and transport

requirements according to the technical

data: see Section 10.2

“AXL F SSDO8/3 1F” on page 63.

Modules will no longer be used.

Dispose of modules in accordance with the

environmental regulations. Make sure that

the modules can never be reused.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Summary of Contents for 2702171















































































Search results

Summary of Contents for 2702171

Reviews:

Related manuals for 2702171

Brands by name

Popular brands

Phoenix Contact 2702171, User Manual

Search results

Summary of Contents for 2702171

Reviews:

Related manuals for 2702171

Brands by name

Popular brands