Philips WelcomeEye Link 531034, User Manual

Page: 34 / 39

WelcomeEye / Link / V1
F32
- Select your connected doorbell (the name you chose during set up is shown)
- Choose “
Afficher ” (Display), then press “Suivant” (Next)
4 - Add the triggers for this action:
- Add a trigger
- Select your connected doorbell (the name you chose during set up is shown)
- Select the trigger “
Lancer un appel ” (Initiate a call), then press “Suivant” (Next)
5 - Name your scenario and choose in which room it will appear and press “Validez”
(Confirm)
E - Viewing your Philips WelcomeEye Link video stream using a voice assistant
Step 1
Link your Philips WelcomeHome account directly from your voice assistant app. (Google
Home example shown below). To do this:
1 - Open the “ Google Home ” app
2 - On the home page, press “ + Ajouter ” (+ Add), then “ + Configurer un appareil ” (+
Configure a device)
3 - Select “
Vous avez déjà configuré des appareils ” (You already have devices set up)
4 - Find “ Philips WelcomeHome ” in the list and select it
5 - Approve the pairing and enter your Philips WelcomeHome account username and
password
6 - Press “Validez” (Confirm).
Note: Do not pair multiple Google Accounts on your Google Home app to avoid disruptions
between different features.
Step 2
Create your voice assistant on your Philips WelcomeHome app
1 - Open the “ Philips WelcomeHome ” app
2 - In the menu bar, at the top of your screen, press '' ''
3 - Select “ Ajouter un appareil ” (Add a device)
4 - Select Google Home or Amazon Alexa
5 - Press “
Suivant ” (Next) until you exit the wizard
6 - Once installed, go to your installed devices page, and click on the “ Google Home ”
or “ Amazon Alexa ” icon to request synchronization
10. TECHNICAL CHARACTERISTICS
WiFi: IEE 802.11 b/g/n 2.4 GHz.
Optional doorbell frequency: 433MHz.
Viewing angle: 160° horizontally, 90° vertically.
Video resolution: 1080p.
Memory: micro-SD class 10 up to 128 GB
Protection rating: IP44 (As far as possible, avoid direct exposure of the intercom panel to
bad weather. Installation in a porch or covered area is preferable.)
Night vision: 2 infra-red LEDs (light not visible).
Gate control: breaking capacity 12V - 2A
Battery: Li-ion 3.7V 5000mAh
Operating life: approximately 200 days (1 trigger per day, detection function not enabled)
Recharge time: approximately 5 hours.
Operating temperature: -10°C, +45°C
Panel dimensions (mm): 148 x 53 x36