Philips WelcomeEye Link 531034, User Manual

Page: 21 / 39

WelcomeEye / Link / V1
F19
(Next).
Name the group, then confirm by pressing “ Créer ” (Create).
D - To add a scenario , you must set: a trigger, an action and a triggered element.
Up to 10 scenarios can be programmed.
The example shows a Philips Hue light bulb turning on whenever a visitor rings the LINK
videophone intercom.
Note: before programming a scenario, all devices must be registered to and operating
from the Philips WelcomeHome application (see Chapter 9. COMPATIBLE PRODUCTS).
Press “ Ajouter une action ” (Add action), “ Appareil ” (Device), and then select the room
where the device to be controlled is located. Confirm your device.
Choose the action you want the device to perform, then press “ Suivant ” (Next)