15.2
Restore previous firmware
After the firmware of Center is upgraded, you can restore it to its previous version as desired.
On Center
Press
MENU
to enter the menu screen.
Use
3
or
4
and
2
to enter
Settings
followed by
Firmware
, then
Restore firmware
.
Press
2
to select
Yes
.
After upgrading or restoring the firmware of Center, you need to reestablish the Wi-Fi connection
between Center and Stations.
15.3
Re-establish Wi-Fi network of Center and Stations
On Center:
Press
MENU
to enter the menu screen.
Use
3
or
4
and
2
to enter Station Mgnt menu.
Use
3
or
4
and
2
to select
Add New Station
.
>
Searching for Stations starts.
On Station:
Disconnect the power plug of Station and then connect them to the power supply again.
>
Connecting to Center appears.
Press
MENU
on the remote control to enter the selection screen of Installation Mode.
Use
3
or
4
and
2
to enter Installation Mode.
>
Stations start to connect to Center.
Press
STOP
9
on Center when all Stations are found.
4
3
2
1
3
2
1
3
2
1
Firmware upgrade
81
ENGLISH
