Network settings
68
11.4
Connect to two different home networks
WAC3500D can be added into two different home networks via wired and wireless network ports.
Note that the IP addresses of the two different network ports cannot be in one subnet;
WAC3500D has no router function and cannot determine which port to use.
Applicable if you have two home networks.
WAC3500D cannot shadow the IP of a network device that is not activated. Please be careful of
the IP address settings to avoid IP address conflict between the wired and Wi-Fi ports.
11.5
View connection status with home network
Check that Center is in HD source.
Press
MENU
to enter the menu screen.
Use
3
or
4
and
2
to enter
Information
menu.
>
The display shows: System,Wireless and Wired.
Use
3
or
4
and
2
to select
Wireless
or
Wired
.
>
Wireless
: information about the Wireless settings.
Wired
: information about the Wired settings.
11.6
Connect to Internet
Check that you have connected Center to an access point or router with Internet access or
connect Center to an ADSL modem with internet access directly.
Set DNS and Gateway
If you are using a DHCP* enabled access point, router or ADSL modem, the DNS and Gateway can
be obtained automatically, so you need only to set Center to Automatic (DHCP):
Press
MENU
.
Use
3
or
4
and
2
to select
Settings
followed by
Network
.
2
1
Important!
Make sure that no dial-up, user name or password is required for the Internet
access.
4
3
2
1
Important!
Once Center is added to the Wi-Fi network, all Wi-Fi ad-hoc connections with the
WAC3500D will be shut down.
