Philips VARI-Lite VL4000, User Manual

Page: 89 / 118

M
ENU
S
YSTEM
: M
ENU
O
PERATION
4
0 2 . 9 7 0 4 . 0 0 0 1 D 0 3 F e b r u a r y 2 0 1 5 71
Fixture
Displays fixture
information,
condition or
downloads new
software
Status
Status/Error Display
Fixture OK
. . . Or displays a list of errors encountered
during calibration process or operation.
ReCalibrate Fixture
Recalibrate (re-homes) all
mechanical parameters of the
fixture
Are you sure? Confirmation that
recalibration has
been executed
ReBoot Fixture
Reboots entire fixture including
processor
Are you sure?
Luminaire ID
Displays luminaire’s ID number
######
Software Version
Current software installed in
fixture
XX/XX/XX
Software Version Date
XX:XX
Software Version
Time
Fixture Hours
Fixture Hours On (powered)
XXXXXX
Hours
Crossload Software
Download (send) fixture’s
software to other connected
fixtures.
Send Sending Version
XX/XX/XX XX:XX
Sending Software
Version Date / Time
Crossload
Complete
Service
For use by authorized service
technicians only.
Service Settings Set Tilt Cal
Gobo 1 Offset
Gobo 2 Offset
Diagnostics Ballast Info
Fan Check
Board Check
Debug
USB Update OS
Log File Download
Reset
Table 4-1: Menu System Chart (Continued)
1st Level 2nd Level 3rd Level 4th Level 5thLevel
For
Service Settings
and
USB
menu descriptions, refer to the following:
• “Set Tilt Cal” on page 76
• “Gobo Offset” on page 77
• “USB Logging” on page 77 (for Log File)
• “Installing or Updating Luminaire Firmware” on page 58 (for Update OS)