Philips VARI-Lite VL4000, User Manual

Page: 85 / 118

M
ENU
S
YSTEM
: M
ENU
O
PERATION
4
0 2 . 9 7 0 4 . 0 0 0 1 D 0 3 F e b r u a r y 2 0 1 5 67
Menu Tree
Figure 4-3 and Figure 4-4 on page 68 are graphical representations of the menu system.
Figure 4-3: Menu Tree Part 1
Address - value (1 thru 512) DMX Data** Ch 1 - Intensity XXX (Value)
Ch 2 - Pan High Byte XXX (Value)
Ch 3 - Pan Low Byte XXX (Value)
Ch 4 - Tilt High Byte XXX (Value)
Ch 5 - Tilt Low Byte XXX (Value)
Ch 6 - Edge High Byte XXX (Value)
Ch 7 - Edge Low Byte XXX (Value)
Ch 8 - Zoom High Byte XXX (Value)
Ch 9 - Zoom Low Byte XXX (Value)
Ch 10 - Programming Control XXX (Value)
Ch 11 - Cyan XXX (Value)
Ch 12 - Yellow XXX (Value)
Ch 13 - Magenta XXX (Value)
Ch 14 - CTO XXX (Value)
Ch 15 - Col Whl 1 XXX (Value)
Ch 16 - Col Whl 1 Ctrl XXX (Value)
Ch 17 - Col Whl 2 XXX (Value)
Ch 18 - Col Whl 2 Ctrl XXX (Value)
Ch 19 - Gobo Whl 1 XXX (Value)
Ch 20 - Gobo 1 Indx High XXX (Value)
Ch 21 - Gobo 1 Indx Low XXX (Value)
Ch 22 - Gobo 1 Ctrl XXX (Value)
Ch 23 - Gobo Whl 2 XXX (Value)
Ch 24 - Gobo 2 Indx High XXX (Value)
Ch 25 - Gobo 2 Indx Low XXX (Value)
Ch 26 - Gobo 2 Ctrl XXX (Value)
Ch 27 - Animation Whl 1 XXX (Value)
Ch 28 - Animation 1 Indx High XXX (Value)
Ch 29 - Animation 1 Indx Low XXX (Value)
Ch 30 - Animation 1 Ctrl XXX (Value)
Ch 31 - Animation Whl 2 XXX (Value)
Ch 32 - Animation 2 Indx High XXX (Value)
Ch 33 - Animation 2 Indx Low XXX (Value)
Ch 34 - Animation 2 Ctrl XXX (Value)
Ch 35 - Iris XXX (Value)
Ch 36 - Frame 1A XXX (Value)
Ch 37 - Frame 1B XXX (Value)
Ch 38 - Frame 2A XXX (Value)
Ch 39 - Frame 2B XXX (Value)
Ch 40 - Frame 3A XXX (Value)
Ch 41 - Frame 3B XXX (Value)
Ch 42 - Frame 4A XXX (Value)
Ch 43 - Frame 4B XXX (Value)
Ch 44 - Frame Rotate XXX (Value)
Ch 45 - Prism XXX (Value)
Ch 46 - Prism Indx High XXX (Value)
Ch 47 - Prism Indx Low XXX (Value)
Ch 48 - Prism Divergence XXX (Value)
Ch 49 - Frost XXX (Value)
Ch 50 - Strobe Speed XXX (Value)
Ch 51 - Strobe Ctrl XXX (Value)
Ch 52 - Focus Timing XXX (Value)
Ch 53 - Optic Timing XXX (Value)
Ch 54 - Color Timing XXX (Value)
Ch 55 - Beam Timing XXX (Value)
Ch 56 - Gobo Timing XXX (Value)
Ch 57 - Luminaire Ctrl XXX (Value)
Notes:
*Factory default setting.
**Channel and Dimmer information displayed simultaneously.
***Reboots entire fixture including processor.
# For use by authorized service technicians only.
- CONTINUED NEXT PAGE -
Configure
Pan / Tilt Movement Enable
Disable
Display
On Time Auto
30 Sec
5 Min
10 Min
Change Luminaire ID ######
Reset Defaults Are you sure?
Lamp Power
Lamp Hours
On*
# of hours
Reset Lamp
Hours
Are you sure?
Head Motors
Off
Power Up
Lamp On
Lamp Off*
Cal On
Movement Enable
Disable
Orientation Auto
Up
Down
On
Lamp Level Standard*
Studio
Pan/Tilt Swap Pan/Tilt
Invert Pan
Off*
On
Off*
On
Invert Tilt Off*
On
DMX Map 16-bit Enh*
16-bit
Fixture Status Fixture OK... or displays a list of
errors encountered during
calibration process or operation.
ReCalibrate Fixture Are you sure?
Service #
Luminaire ID ######
Software Version MM/DD/YY HH:MM
Fixture Hours XXXXXX Hours
ReBoot Fixture*** Are you sure?
Crossload Software Send
Sending Version
XX/XX/XX XX:XX
Crossload
Complete
Diagnostics
Ballast Info
Fan Check
Board Check
Debug
USB Update OS
Log File Download
Reset
Service Settings
Set Tilt Cal
Gobo 1 Offset
Gobo 2 Offset