Philips VARI-Lite VL4000, User Manual

Page: 82 / 118

VARI
❋
LITE - VL4000 S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
6 4 0 3 F e b r u a r y 2 0 1 5 0 2 . 9 7 0 4 . 0 0 0 1 D
Menu Operation
LCD Display and Menu System
The VL4000 Spot Luminaire’s LCD Display and Menu System provides local control for accessing
the following fixture’s settings:
• Address – to set the DMX address
• Setup – to change lamp modes (Standard or Studio)
• Configure – various parameter settings, set luminaire ID
• Fixture – fixture status, recalibrate, reboot, software version, view fixtures hours, etc.
• DMX – change the map (16-bit Enhanced or 16-bit), view DMX values, and swap/invert pan/tilt
• Service – password protected factory service menu
• Manual – manual control of parameters
• Test – test functions of parameters
The menu system is controlled at the Menu Display available at the enclosure input panel. If there are
multiple luminaires in a system, any settings or changes would need to be made at each LCD Menu as
desired.
Menu Controls
The menu system is controlled by an OK (Enter), ESC (Escape), and four Arrow (

) buttons.
These buttons function are shown in Figure 4-1 .
Figure 4-1: Menu Control
ESC
OK
ON
LAMP
NO
ERRORS
16E
MAP
331
ADDR
VL4000 Spot Luminaire
STU
MODE
LCD Display
OK (Enter) Button
To Select or Change a
Setting or Data Value
ESC (Escape)
Used to Access Main Menu Parameters,
Exit, or Return to Previous Menu Item
Arrow Keys (Up/Down/Left/Right)
Menu Navigation / Data Selection
ESC
OK
Displays all Data and
LCD Menu Proximity Sensor
Automatically enables the menu display (turn on
the backlight) as you reach for the front panel.
Luminaire Settings