Philips VARI-LITE 400 Series, User Manual

Page: 109 / 116

T
ROUBLESHOOTING AND
M
AINTENANCE
A
0 2 . 9 6 8 7 . 0 0 0 1 0 2 6 J u l y 2 0 1 1 91
Step 4. Grasp gobo carrier with fingers and gently pull gobo assembly straight up and out of fixed
gobo wheel. Note orientation of fixed gobo. New gobo must go in exactly the same.
Figure A-11: Removing / Installing Fixed Gobos
Step 5. At position where fixed gobo was removed, place replacement fixed gobo over open slot (as
shown in Figure A-12 ), slide into wheel, and gently snap gobo into place.
Figure A-12: Fixed Gobo Wheel - Gobo Installation.
Step 6. After gobo is installed, reinstall rear head cover.
Fixed Gobo Carrier Assembly
Fixed Gobo Orientation
Rear of filter. This side (reflective
side - image on this side) towards
lamp.
Front of gobo. This side (non-
reflective side) towards front of
luminaire. Note dimple in tab.
Mounting Tab (dimple on
front side)
Pull gobo straight up and
away from wheel
assembly
Image
Mounting Tab
(dimple on front side)
Open Position
(no gobo)
Note :
Assembly shown for clarity.
Fixed Gobo
Front of Assembly Shown
(side towards front lens)