Philips Signage Solutions E-Line Display BDL5551EL/00, Service Monitor

Page: 11 / 123

11
has been detected
- Lights Off when the main power of the display
is turned off.
• Indicates the operating status of the display with
OPS:
- Lights green when the display is on, but the
OPS is off
- Lights blue when the display and the OPS is
on
- Lights red when the display is in standby
mode
- --Lights amber when the display enters APM
mode
- - -When {SCHEDULE} is enabled, the light
blinks green and red
- - -If the light blinks red, it indicates that a
failure has been detected
- - -Lights off when the main power of the
display is turned off
3.2 Input/ Output Terminal
1. AC IN
AC power input from the wall outlet.
2. MAIN POWER SWITCH
Switch the main power on/off.
3. AC OUT
AC power supply to the AC IN jack of a media
player.
4. USB
Connect your USB storage device.
5. IR pass through:
Outputs the remote control IR signal of set-top box
to a external set-top box through 3.5mm jack cable.
6. RS232C OUT
RS232C network output for the loop-through
function.
7. RS232C IN
RS232C network input for the loop-through
function.
8. RJ-45
LAN control function for the use of remote control
signal from control center.
9. HDMI IN
HDMI video/audio input.
10. DisplayPort