Philips Signage Solutions E-Line Display BDL5551EL/00, Service Monitor, Page: 20 / 123

20
enter the following value manually. When finished,
press [SET] button to store and save the chosen
values.
 IP address
 Subnet mask
 Default gateway
 Login user name (The default user name is {admin})
 Login password (The default password is {0000})
Configuration reset
Reset all settings in the Configuration1 menu to factory
preset values.
Factory reset
Reset all the settings in the OSD menus of {Picture},
{Screen}, {Audio}, {PIP}, {Configuration1},
{Configuration2}, and {Advanced option} to factory
preset values.
Press [+] or [-] button to select [Reset], and then press
[SET] button to do the reset
.
Configuration2 Menu
OSD turn off
Set the period of time the OSD(on-screen display)
menu stays on the screen.
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD displayed
on the upper right corner of the screen. The
information OSD will display when input signal is
changed.
The information OSD will remain on the screen with
{Off} selection.
The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within
an amount of time specified.
The options are: {off, 1 ~ 24} hours from current time.
NOTE: When the “Off timer” is activated, the
“Schedule” settings will be disabled.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model
number, serial number, operating hours and software
version.