Philips Saeco GranBaristo, Service Manual

Page: 71 / 83

GRAN BARISTO 07 DISASSEMBLY
5/10
7.5. Coffee grinder adjustment
The grinding adjustment can be set by the user
(only with the coffee grinder in operation) by
pressing and turning (only by one click at a time)
the insert inside the coffee bean hopper with the
aid of the wrench supplied.
Adjustment by a service center
To adjust grinding further, the tecnical service can
work directly on the coffee grinder by pressing
and turning the ring nut (C) shown. (clockwise
+ to increase the particle size of the coffee and
anticlockwise - to decrease it).
If there are any remains of coffee powder between
the two grinding blades it is recommended to tighten
by max. two marks at a time.
Lastly, move the point yellow (A) on the adjustment
knob to the center of the adjustment .
C
+
-
A
7.6. Solenoid valve and assembly drain valve
Loosen the screws holding the
solenoid valve to the upper plate
Loosen the screws holding in
the support the solenoid valve.
Disconnect all electrical and
water circuit connections.
+
-
Slide out the fork as illustrated
and disconnect the electrical /
idraulics connections.
+
-
Removable coffee bean hopper (depending on the model)