Philips Saeco GranBaristo Service Manual Download Page 21

Page: 21 / 83

GRAN BARISTO

03 BRIEF INSTRUCTIONS

4/6

WATER CIRCUIT

PRIMING

RESTART TO SOLVE

CHANGE FILTER

The machine needs the

“” water fi lter to be

replaced.

The machine is priming the

water circuit. Wait for this

operation to be over.

Download the application on your mobile device to access the machine functions.

To connect GranBaristo Avanti with your mobile device, download the Saeco

Avanti App available on the App Store and Google Play or scan the QR code

on the cover with your mobile device. As an alternative, connect to the www.

saeco.com/Avanti-app website using the device on which you wish to download

the application.

The GranBaristo Avanti Bluetooth function is enabled by default. If it is disabled, fol-

low the instructions below to enable it again:

Note:

Before starting the connection procedure, make sure that the Bluetooth

function on your mobile device is active.

The red light fl ashes. Press any

button to exit the stand-by mode.

Take note of the code (E xx) shown on the display at the bottom.

Turn off the machine. Turn it back on after 30 seconds. Repeat the procedure 2 or

3 times.

If the machine does not start, contact the Philips SAECO hotline in your country

and quote the code shown on the display. Contact details can be found in the war

ranty booklet packed separately or at www.philips.com/support.

BLUETOOTH CONNECTION

PROFILE SAECO

EDIT PROFILES

MAINTENANCE

SETTINGS

STATISTICS

SETTINGS

STAND-BY TIME

BUTTON SOUND

BLUETOOTH

RESTORE TO DEFAULT

SETTINGS

STAND-BY TIME

BUTTON SOUND

BLUETOOTH

RESTORE TO DEFAULT

Press the “ ” button to access the machine main menu.

Press the “ ” button to select “SETTINGS”. Press “ ” to confirm.

Press the “ ” button to select “

BLUETOOTH

”.

Press “ ” to confirm.

Summary of Contents for Saeco GranBaristo




















































































Search results

Summary of Contents for Saeco GranBaristo

Reviews:

Related manuals for Saeco GranBaristo

Brands by name

Popular brands

Philips Saeco GranBaristo, Service Manual

Search results

Summary of Contents for Saeco GranBaristo

Reviews:

Related manuals for Saeco GranBaristo

Brands by name

Popular brands