Philips Saeco GranBaristo, Service Manual

Page: 46 / 83

GRAN BARISTO 05 SERVICE MODE
14/30
Activation of loads
In Test Mode all loads are initially disabled.
To activate a load press the corresponding button on keyboard, to deactivate press again the
same button.
Other conditions for which a load may be switched off automatically without key presses are:
· If it is defined a working cycle, when this cycle ends (such as the grinder or brew unit)
· The achievement of 90°C for boiler
Navigation in Test Mode
SoftwareVersion
This is the first window of Factory Test Mode. It show the version of CPU software and CPU
bootloader version, the PWR software and PWR bootloader version and is possible to activate or
deactivate the POff feature and Debug info.
Debug msg: if enabled (colored box), only for next startup, allows the visualization of the follow -
ing debug info on display in Ready state:
P Off:
if enabled (colored box), allows the machine to enter in standby mode immediately after
powering ON from the main switch.
Make sure that the function P Off is turned ON and the Debug msg is turned OFF.
CPU SW xx.yy.zz
Debug msg
^ P Off ^ ^
BootC V.jj BootP V.kk
POWER SW uu.vv.ww
Press
OK ( )
button to modify one of the following feature:
Grinder Time
Aroma 1
(msec)
Encoder Pulses
Home Work
About Last Cycle
Encoder Dreg Counter:
4000 ->dreg drawer empty
0-> dreg drawer full
Grinder Time
Aroma 4
(msec)
Grinder Time
Aroma 2
(msec)
Grinder Time
Aroma 5
(msec)
Grinder Time
Aroma 3
(msec)
Grinder Time
Aroma 6
(msec)
Encoder Pulses from
HOME to
Pod Pressure about
Last Cycle
Target Encoder Pulses
from HOME to Pod Pressure
about last Cycle
Press UP ( ): go to next page