Philips Qdeo BDP9700, User Manual

Page: 19 / 32

11 EN
2 Change settings
This section helps you change the settings of
this player.
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press
BACK
. To
exit the menu, press .
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
• [TV display] : Select a picture display format
to fit the TV screen.
•
[HDMI video]
: Select an HDMI video
resolution.
•
[HDMI Deep Colour]
: Display colours
with more shades and hues when the
video content is recorded in Deep Colour
and the TV supports this feature.
•
[Picture settings]
: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
1
2
3
Watch 3D video
OK
DISC MENU
POP-UP
MENU
TOP
MENU
OK
DISC MENU
POP-UP
MENU
TOP
MENU
• [Watch 3D video] : Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i or
480p/576p under [HDMI video] to enable video output.
Sound
1
Press .
2
Select
[Setup]
>
[Audio]
to access the
audio setup options.
• [Night mode] : Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
• [Neo 6] : Enable or disable a surround
sound effect which is converted from 2.0
channel audio.
• [HDMI (MAIN) audio] : Select an audio
format for sound output when this player
is connected to a TV through
HDMI OUT
(MAIN)
connector.
•
[HDMI (AVR) audio]
: Select an audio
format for sound output when this player
is connected to a AV receiver through
HDMI OUT (AV RECEIVER)
connector
("AVR" is short for "AV Receiver").
•
[Digital Audio]
: Select an audio format
for the sound output when this player is
connected through a digital connector
( COAXIAL or OPTICAL ).
• [PCM Downsampling] : Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector ( COAXIAL or OPTICAL ).
BDP9700_79_UM_EN.indd 11 9/18/2014 3:13:45 PM