- Unplug power cord before plugging in or
unplugging the product.
- Only use the power cord and other
accessories supplied with the product.
- Do not attempt to open the product to
remove or replace the built-in
rechargeable battery.
- The batteries used in this product may
present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat
above 100°C (212°F) or incinerate.
IMPORTANT
: The power plug contains a
transformer. Do not cut off the power plug
to replace it with another plug as this will
cause a hazardous condition.
SAVE THESE
INSTRUCTIONS
Introduction
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benefit from the support that
Philips Norelco offers, register your product
at
www.norelco.com/register
.
General description (Fig.1)
1 Cutting element
2 Vacuum system
3 Length settings
4 Zoom wheel
5 On/off button
6 Battery status indicator
7 Pouch
8 Cleaning sponge
9 Small plug
10 Power plug
11 Precision trimmer
12 Detail comb L (5mm/3/16in)
13 Detail comb M (3mm/1/8in)
14 Beard and stubble comb
Not shown: cleaning brush
Display
Battery status indicator
- When the battery is almost empty, the
battery charge indicator flashes orange
(Fig. 2).
- When the product is charging, the battery
charge indicator flashes white (Fig. 3).
- When the battery is fully charged, the
battery charge indicator lights up white
continuously (Fig. 4).
Note: The lights switch off automatically
after 30 minutes.
Length settings
The selected hair length setting will light up
on the front of the handle when you select
the desired length setting with the zoom
wheel (Fig. 5).
Charging
Charging takes approx. 1 hour. Charge the
product before first use and when the
display indicates that the battery is almost
empty.
- Charging, recharging, or using the
product at temperatures below 40°F
(4.5°C) or higher than 95°F (35°C)
adversely affects lifespan of the battery.
- If the product is subjected to a major
change in temperature, pressure or
humidity, let the product acclimatize for
30 minutes before using.
1 Make sure the product is turned off.
2 Put the small plug in the product and put
the power plug in the wall outlet.
3 After charging, remove the power plug
from the wall outlet and pull the small
plug out of the product.
When the product is fully charged, it has a
cordless operating time of up to 80
minutes.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use
an attachment plug adapter of the proper
configuration for power outlet.
Using the product
Always check the product and all
accessories before using. Do not use the
product or any accessory if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original
type.
