Note: This product can be used without
cord or directly from the power outlet.
Note: Switch off and clean the product after
each use (see 'Cleaning').
- Use this product for its intended
household use as described in this
manual.
- For hygienic reasons, the product should
only be used by one person.
- Trimming is easier when the skin and
hairs are dry.
Switching the product on and off
Press the on/off button once to switch the
product on or off (Fig. 7).
Trimming with comb
Note: When you trim for the first time, start
at the highest length setting to familiarize
yourself with the product.
- You can use the beard and stubble comb
attached to the cutting element to groom
your beard and moustache in your
preferred style. For the beard and
stubble comb, you can turn the zoom
wheel to choose from 20 length settings
ranging from 0.5mm to 10mm/1/32in to
13/32in in steps of 0.5mm/1/32in (Fig. 5).
- You can use the precision trimmer with a
detail comb attached for precision
trimming of your sideburns, moustache
or beard (Fig. 17).
Note: Switch off and clean the product after
each use (see 'Cleaning').
1 Attach the detail comb (Fig. 16) or the
beard and stubble comb onto the
product (Fig. 8).
2 Switch on the product.
3 To trim most effectively, move the
product against the hair growth direction
(Fig. 9). Make sure that the surface of the
comb always stays in contact with the
skin.
Trimming without comb
- You can use the product without beard
and stubble comb to trim hair close to
the skin or to contour the neckline and
sideburns. To trim hair close to the skin,
place the flat side of the trimming head
against your skin and make strokes in the
desired direction (Fig. 11).
- For contouring hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards
with gentle pressure (Fig. 12).
- You can use the precision trimmer to
create fine lines and contours around
your facial style, close to the skin (Fig. 15).
Simply pull the cutting element straight
off (Fig. 13) and insert the precision
trimmer (Fig. 14).
Detail trimming without comb
You can use the detail trimmer to create
fine lines and contours around your facial
style, close to the skin.
1 Remove the cutting element (Fig. 13) and
attach the detail trimmer (Fig. 14).
2 Switch on the product.
3 Hold the detail trimmer perpendicular to
the skin and move the detail trimmer
upwards or downwards with gentle
pressure (Fig. 15).
Detail trimming with comb
You can use the detail trimmer with the
detail comb attached for precision trimming
of your sideburns, moustache or beard.
There are 2 different detail trimming combs:
M (3mm) and L (5mm)
1 Attach the detail trimming comb onto the
detail trimmer (Fig. 16).
2 Switch on the product.
3 To trim most effectively, move the
product against the hair growth direction.
Make sure that the surface of the comb
always stays in contact with the skin (Fig.
17).
4 Switch off and clean the product after
each use (see 'Cleaning').
Cleaning
Only the cutting element and combs can
be cleaned with water.
