- 68 -
8.
Network installation wizard
To connect to a network you have to go to the [
Professional Settings
] [
Wireless and Networks
]
[
Connect to Network
] menu.
Note: Some screens will be shown depending on your settings or selections made, some screens will not
be shown
Wired, Wireless, WPS, WPS with PIN code
selection
When ‘
Wired
’ was selected you will go to
the next screen where you will see a
message that the router is contentiously
scanned until a network connection is
found
Once a network is found you will see a
screen that the wired network is
connected
Note: The yellow connector is to be used
for Serial Xpress and not for a wired
network connection
When ‘
Wireless
’ was selected you will see
that the TV is scanning for wireless
networks and it will show the networks
that were found
After selecting a network (and entering
the password if needed) you will get
message that the wireless network is
connected, the name of the network is
mentioned and also the encryption
When ‘
WPS
’ was selected you will see that
you have to press the WPS button on the
router and press within 2 minutes on the
connect button
Once you pressed you will get a
‘connecting’ message
Once connected you will get a message
