3-1
3-1
PCS 103 738
DISMANTLING INSTRUCTIONS
Dismantling of the Cassette Cover
Dismantling of the Front Panel
1) Slide out the tray an remove the Cover Tray CDC (pos 107)
as indicated.
2) Loosen the 8 screws to separate the Front Panel from the
rear portion.
- 2 screws B on the front
- 2 screws each on the left & right side
- 2 screws at the bottom
Dismantling of the Cover Control on the Front (see Notes)
1) Insert a strong string into the slot between the Volume
knob (pos 146) and Cover Ring Volume (pos 144), looped
it 1,5 turns securely around the Volume knob and pulled it
out as shown.
2) Use a 0.5mm thick paper clip or stiff wire and bend into the
shape as shownbelow. Hook the 2 ends of the clip or wire
into the slots.
3) Hold the clip or wire in position and pulled out the Cover
Ring DSC (pos 143).
4) Remove the 2 hidden screws A to take out the Cover
Control (pos 153).
Note
: Only the Lightguide DSC (pos 127) is sandwiched
between the Front Cabinet (pos 101) & Cover Control
(pos 153).
Removal of Cover Ring DSC is not recommended
unless any of the parts (pos 101, 127, 143 & 153)
are need to be replaced and may cause some
damage to the existing parts!
3. Lift up and out
1. Place screw driver
(flat side) between
the cover & cassette
door
2. Twist screw driver
Cassette Cover
