E
n
g
lis
h
75
System Menu Options
(continued)
Access settings
(underlined options are the factory default settings)
You will be prompted to enter the four-digit pin code.
– When doing this for the first time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
– If you forget your four-digit pin code, key in ‘1504’. Then enter any
four-digit you prefer and enter the same pin code again to confirm it.
Childlock
With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
Yellow
button on the remote control to set the childlock on or off.
Note:
This recorder can memorise settings for 50 discs.
{
On
}
– Turns on child lock function.
A four-digit pin code must be entered in order to play
the locked disc or title in the HDD.
{
Off
}
– All discs can be played.
Change pin
Use the
alphanumeric keypad 0-9
to enter your new four-digit pin code.
You must enter the same pin code again to confirm it.
To cancel your change, press
to select {
Cancel
} in the menu and
press
OK
on the remote control.
Features settings
(underlined options are the factory default settings)
Auto resume
With this feature, you can resume playback of the disc from where it last
stopped point. This applies to the last 20 DVDs and Video CDs you
played.
{
On
}
– Turns on auto resume mode.
{
Off
}
– The disc will always start from the beginning when you
load a disc or start playback.
####
Enter PIN of your choice
This will be used to access locked features.
Pin Code
Cancel
74
dvdr7300h_eu_eng2.indd 74
2005-10-04 4:16:03 PM
