E
n
g
lis
h
46
47
Record to Hard Disk or recordable DVD
(continued)
TIPS:
Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
Recording from an external
device (VCR/DVD player)
You can record from an external device
which is connected to this recorder’s
input socket. Copy-protected material
cannot be recorded on this recorder.
IMPORTANT!
It is not possible to record the disc
playback from this recorder to its
HDD.
TUNER
A
Connect the external device to this
recorder (see page 20).
B
Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
C
Turn on the recorder and press
CAM
on the remote control.
A warning message appears.
D
To continue, select to record to {
Hard
Disk
} or {
Recordable DVD
} in the
menu and press
OK
to confirm.
All the contents in the temporary
HDD storage will be cleared except for
the ‘marked’ recordings.
Otherwise, select {
Cancel
} in the menu
and press
OK
to abort the operation.
E
Press
CHANNEL
+-
repeatedly to
select the correct input channel that
matches the connected socket of the
device.
{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
F
Start playback on the connected device.
G
Press
REC
to start recording.
To pause the recording, press
PAUSE
Å
.
To continue recording,
PAUSE
Å
again.
You can use this function to avoid
unwanted recording.
A new chapter marker is created after
recording restarts.
H
To stop the recording, press
STOP
.
I
To end the recording operation, press
TUNER
.
Helpful Hint:
– If ‘X’ appears at the bottom of the TV
screen, it means that there is no video signal
received from the current input channel.
dvdr7300h_eu_eng2.indd 46
2005-10-04 4:14:51 PM
