#
GB
If necessary, you can align your parabolic antenna using the sub-menu «Antenna signal». Turn
the antenna to the optimum position in the scales indicating field strength and signal reception
quality.
If the signal is very weak, the field strength scale may also fall to 0 - in which case you should
optimise the signal using the reception quality scale.
If the message «No signal» appears and only the field strength signal is indicated, the antenna
may be aligned with a satellite for analogue signals (which cannot be received by this receiver).
4.1.4 Parental control
The five-digit security code (PIN) is set to
0 0 0 0 0
in the factory by default.
a)
Changing the security code (PIN)
Select the «Parental control» menu using key
4
from the Main menu «Channels». Then select
the {PIN} input field using key
2
or the
9
key and activate it by pressing the
OK
key. Enter the
‘
old
’ and
your
‘
new
’
PIN
in the following sequence.
1. Please enter the current PIN. (=
0 0 0 0 0
for first use)
2. Please enter the new PIN.
3. Please repeat the new PIN.
N.B.:
Do not forget your PIN.
Resetting to the default settings is only possible by factory customer
service!
All channels are accessible using the default settings - you can block each individual channel
against unauthorised access.
Marking the channels to be blocked is done either via the «
Favourite list
» or «
Channel pool
»
menus using the
RC
key.
After marking, the channel name is preceded by a «
?
», after which the next channel is called up
to enable marking of several channels by repeatedly pressing the
RC
key.
To delete the marking, press the
RC
key again when the relevant channel is highlighted.
Example:
Sky News
?
Super Action
?
Super Spezial
Südwest BW
b)
Activating the parental control
To activate blocking of the channels marked «
?
», switch
ON
the {Security} input field in the
«Parental control» menu and confirm by pressing the
OK
key when exiting the menu.
When calling up the marked channels you will be required to enter
your own
five-digit PIN.
