26
Device setup
DreamStation BiPAP autoSV User Manual
2.9 Connecting to Wi-Fi (if available)
If your device has a Wi-Fi accessory installed and enabled, follow the steps below to connect your device to
Wi-Fi. For additional information, see the instructions included with your Wi-Fi accessory.
1. From the
My Setup
menu, select
Wi-Fi
.
2. The Wi-Fi accessory will search for available networks within range of your device. Press the control dial
to select your network.
3. If your network is secure, a Passkey pop-up screen appears. Enter your network password, and then
select the green check mark.
Once your password is entered, the Wi-Fi accessory will connect to your network. When the completed
screen appears, press the control dial to close the screen.
Note
If a red X appears over the signal strength icon, the Wi-Fi accessory detects a wireless router but
cannot connect to it. Try repeating steps 1-3 above, making sure you select the correct network and
enter the correct password.
