![Philips DreamStation BiPAP autoSV User Manual Download Page 36](http://html.mh-extra.com/html/philips/dreamstation-bipap-autosv/dreamstation-bipap-autosv_user-manual_306497036.webp)
24
Device setup
DreamStation BiPAP autoSV User Manual
2.8.4 My Setup
When you select
My Setup
, you will be able to view the following screens. You can change the settings in the
Setup menu. These screens will only display if they are available and enabled on your device.
Icon
Text
Description
Ramp
This displays the ramp starting pressure. You can increase or decrease the
ramp starting pressure in 0.5 cm H
2
O increments.
Note: If a lock icon is displayed on this screen, it indicates that your
provider has locked this setting and you cannot change it.
Ramp time
This enables you to modify the Ramp time setting in 5 minute increments.
The range for this setting is 0 to 45 minutes.
Rise time
Rise time is the time it takes for the device to change from EPAP to IPAP.
If rise time is prescribed for you, you can adjust the rise time from 1 to 6 to
find the setting that provides you with the most comfort. A setting of 1 is the
fastest rise time, while 6 is the slowest.
Flex
This allows you to adjust the level of air pressure relief that you feel when
you exhale during therapy. Your home care provider can enable or disable
this feature. When your provider enables Flex, a level will already be set for
you on the device. You can increase or decrease the setting from 1 to 3. The
setting of 1 provides a small amount of pressure relief, with higher numbers
providing additional relief.
Note: If a lock icon is displayed on this screen, it indicates that your
provider has locked this setting and you cannot change it.
Humidification
This displays the Humidification Mode being used. You can choose between
Fixed or Adaptive Humidification. If a heated tube is being used, the device
will automatically switch to Heated Tube Humidification Mode. A lock icon
will appear next to the mode setting indicating that so long as the heated
tube is attached to the device, this mode cannot be changed. However,
the heater plate and tube temperature settings can still be adjusted on the
device Therapy screen as normal.
Mask type
This setting allows you to adjust the level of air pressure relief based on the
specific Philips Respironics mask. Each Philips Respironics mask may have
a System One resistance control setting. Contact your home care provider if
you cannot find this resistance setting for your mask.
Note: If a lock icon is displayed on this screen, it indicates that your
provider has locked this setting and you cannot change it.