16
Device setup
DreamStation BiPAP autoSV User Manual
2.4 Connecting the breathing circuit
To use the system, you will need the following accessories in order to assemble the recommended breathing
circuit:
• Philips Respironics interface (nasal mask or full face mask) with integrated exhalation port, or Philips
Respironics interface with a separate exhalation device (such as the Whisper Swivel II)
• Philips Respironics flexible tubing, 1.83 m (6 ft.)
• Philips Respironics headgear (for the mask)
To connect your breathing circuit to the device, complete the following steps:
1. Connect the flexible tubing to the air outlet on the back of the therapy device. Line up the connector (1) at
the top of the heated tube to the top of the air outlet port on the back of the device.
2. Press the tubing into place over the air outlet port until the tabs on the side of the tube click into place in
the slots on the sides of the outlet port.
