manualshive.com logo in svg

Philips DreamStation BiPAP autoSV, User Manual

Share
Download
Philips DreamStation BiPAP autoSV User Manual Download Page 31

 

Device setup              19

DreamStation BiPAP autoSV User Manual

2.7  Therapy screen features and optional humidification 

settings

The following screen is displayed while therapy is turned on. The table below describes the different 
features that may appear on your screen. If an accessory is attached to the therapy device, additional 
symbols may appear. Refer to the instructions provided with the accessory for more information.

#

Feature

Description

1

Therapy pressure

Displays the current delivered pressure.

2

Adjustable tube temperature 
setting

You can change this setting from 0 to 5. Only displays when 
optional heated tube is connected.

3

Adjustable humidifier setting

You can change this setting from 0 to 5. Only displays when 
humidifier is attached.

4

Enabled features

If enabled, the following therapy features will display here:

•  Opti-Start

•  Humidifier 

•  I  or E - indicates IPAP or EPAP state

•  Patient breath indication 

Note

The Patient menu screens may be accessed during therapy by pressing the Therapy button ( 

 ). The 

Home screen will appear, allowing for navigation through the My Info, My Provider, and My Setup 
menus. See 

Patient menu navigation 

later in this chapter for additional details on each menu. The 

Preheat menu is not available while therapy is turned on.

Summary of Contents for DreamStation BiPAP autoSV









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands