12
User Manual
Icon
Text
Description
Upload
Allows user to initiate a modem call when an optional Cellular Modem or Wi-Fi
Accessory is installed. After the modem upload has finished, the screen will either
display a green checkmark with the text “Completed” to indicate a successful
upload, or a red X with the text “Failed” to indicate an unsuccessful upload. If the
upload fails, initiate an upload a second time, or contact your home care provider
if the issue persists. This screen is locked if modem is off.
Performance
Check
Your device is equipped with a self-diagnostic tool called “Performance Check.”
This tool can evaluate your device for certain errors. It also allows you to share
key device settings with your home care provider. Use Performance Check when
directed to by your home care provider.
At conclusion of the scan, the screen displays a green checkmark if no issue is
detected. If device displays a red “X,” please contact your home care provider for
assistance.
My Setup:
When you select “My Setup”, you will be able to view the following screens. You can change the settings in the Setup
menu. These screens will only display if they are available and enabled on your device.
Icon
Text
Description
Ramp
This displays the ramp starting pressure. You can increase or decrease the ramp
starting pressure in 0.5 cm H
2
O increments.
Flex
This allows you to adjust the level of air pressure relief that you feel when you
exhale during therapy. Your home care provider can enable or disable this
feature. When your provider enables Flex, a level will already be set for you on
the device. You can increase or decrease the setting from 1 to 3. The setting of
“1” provides a small amount of pressure relief, with higher numbers providing
additional relief.
Note:
If a lock icon
is displayed on this screen, it indicates that your
provider has locked this setting and you cannot change it.
Humidification
This displays the Humidification Mode being used. You can choose between
Fixed or Adaptive Humidification. If a heated tube is being used, the device will
automatically switch to Heated Tube Humidification Mode. A “lock” symbol will
appear next to the mode setting indicating that so long as the heated tube is
attached to the device, this mode cannot be changed. However, the heater plate
and tube temperature settings can still be adjusted on the device Therapy screen
as normal.
