Philips BDL5545E 37
¾
ҏ
Sync processor for monitoring DPMS (support 2 H/V inputs, Support H+V inputs) wake up signal.
¾
ҏ
8-bit A/D converter with 8 selectable inputs, shared with IO pin
¾
ҏ
8 8-bit PWM pin output (One low frequency PWM at 150Hz for dimmer control)
¾
ҏ
Support 2 DDC/CI interface
¾
ҏ
Slave mode I2C interface
¾
ҏ
Master/slave I2C interface
¾
ҏ
Embedded H/W CEC function with 16 bytes R/W buffer
¾
ҏ
Hardware universal IR Receiver with programmable digital filter for noise rejection
¾
ҏ
Watch Dog timer
¾
ҏ
Build-in RTC with calibration register of easy adjustment (1ppm)
¾
ҏ
Analog SOG wake up source
¾
ҏ
Build-in ISP function (with IIC or the UART interface)
¾
ҏ
Embedded ICE mode
¾
ҏ
Maximum 37 programmable IO pins
¾
ҏ
Embedded 3.3v and 1.8v regulator (external VDD=5v)
¾
ҏ
Power down mode
¾
ҏ
Selectable CPU clock sources
¾
ҏ
CPU off mode can be waked up by external interrupt
¾
ҏ
Crystal oscillator off mode can be waked up by external interrupt
¾
ҏ
CPU off mode(RTC mode) current : 600uA, Crystal off mode current : 200uA
4. LPC1768FBD100
The LPC1769/68/67/66/65/64/63 are ARM Cortex-M3 based microcontrollers for embedded
applications featuring a high level of integration and low power consumption.
The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced
debug features and a higher level of support block integration.
The LPC1768/67/66/65/64/63 operate at CPU frequencies of up to 100 MHz. The LPC1769 operates
at CPU frequencies of up to 120 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and
uses a Harvard architecture with separate local instruction and data buses as well as a third bus for
peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative
branching.
The peripheral complement of the LPC1769/68/67/66/65/64/63 includes up to 512 kB of flash memory,
up to 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG interface, 8-channel general
purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus
interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit ADC, 10-bit DAC, motor control
PWM, Quadrature Encoder interface, four general purpose timers, 6-output general purpose PWM,
ultra-low power Real-Time Clock (RTC) with separate battery supply, and up to 70 general purpose
I/O pins.
The LPC1769/68/67/66/65/64/63 are pin-compatible to the 100-pin LPC236x ARM7-based
microcontroller series.
