Philips BDL5545E Service Manual Download

Page: 22 / 47

3.2 SCREEN

H position

Adjust the horizontal placement of the picture.

Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Press the

PLUS

button to move the image to the right, or press the

MINUS

button to move the image

to the left.

V position

Adjust the vertical placement of the picture.

Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Press the

PLUS

button to move the image up, or press the

MINUS

button to move the image down.

Clock

Note: For VGA input only.

Adjust the width of the image.

Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Press the

PLUS

button to expand the width of the image, or press the

MINUS

button to shrink the

width of the image.

Clock phase

Note: For VGA input only.

Adjust to improve the focus, clarity and stability of the image.

Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Zoom mode

The pictures you receive may be transmitted in 16:9 format (widescreen) or 4:3 format (conventional

screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox

format).

This function allows you to optimize the picture display on screen. The following zoom modes are

available for

PC mode:

Full

Normal

Custom

Real

and

21:9.

Video mode:

Full

Normal

Dynamic, Custom

Real

and

21:9.

Philips BDL5545E 21

Summary of Contents for BDL5545E
















































Search results

Summary of Contents for BDL5545E

Reviews:

Related manuals for BDL5545E

Brands by name

Popular brands

Philips BDL5545E, Service Manual

Search results

Summary of Contents for BDL5545E

Reviews:

Related manuals for BDL5545E

Brands by name

Popular brands