Philips BDL5545E 28
¾
Panel saving
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle between
x
COOLING FAN
- Select
On
and the cooling fan is activated all the time. Select
AUTO
and the
cooling fan will turn on/off according to the temperature of display.
Note: The conditions of the cooling fan are low/mid/high speed at 50/58/63 °C respectively. The
display will automatically shut down if a preset critical temperature (82 °C) is reached.
x
Brightness
- Select
On
and the brightness of the image will be reduced to an appropriate level,
and the
Brightness
setting in the
Picture
menu will become unavailable. Use the
PLUS
/
MINUS
button to make selection.
x
Pixel Shift
- Select the time interval for the monitor to slightly expand the image size and shift the
position of pixels in four directions (up, down, left, and right). Use the
PLUS
/
MINUS
button to make
selection (
Off, AUTO, 10-900
seconds from current time).
IMPORTANT
: It is not recommended to keep a single static image displayed on your unit for long periods
of time. This can cause image sticking, or ghost images, which will decrease the quality of your images.
In some instances, ghost image damage can be permanent. Ghost imaging is also not covered by
warranty, so in order to avoid such issues, we strongly recommend one of the following actions:
x
Change the picture periodically
x
Enable
Pixel shift
(See Pixel shift under Section 4.2.5.CONFIGURATION 1 MENU)
x
Use a screen saver with changing image
¾
Serial control port
Choose to enable or disable the function of the control port.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to make
selection.
¾
Configuration reset
Reset all settings in the
Configuration 1
menu.
Press the
SET/PLUS
button to open the submenu, and then press the
PLUS
/
MINUS
button to make
selection. Select
Reset
and press the
SET
button to restore settings to factory preset values. Press
the
EXIT
button or select
Cancel
and press the
SET
button to cancel and then return to the previous
menu.
¾
Factory reset
Reset all settings in the
Picture
,
Screen
,
Audio
,
PIP
,
Configuration 1
,
Configuration 2
, and
Advanced option
menus. Press the
SET/PLUS
button to open the submenu, and then press the
PLUS
/
MINUS
button to make selection. Select
Reset
and press the
SET
button to restore settings to
factory preset values. Press the
EXIT
button or select
Cancel
and press the
SET
button to cancel and
then return to the previous menu.
