User Manual BDL5545E
42
Scan mode
Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and Component inputs only.
Change the display area of the image.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
x
Overscan
- Display about 95% of the original size of the image. The rest of the areas surrounding the
image will be cut off.
x
Underscan
- Display the image in its original size.
Scan conversion
Choose to enable or disable the IP (Interlace to Progressive) conversion function.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
x
Progressive
- Enable the IP conversion function (recommended). Once enabled, the interlace input
signal will be converted to progressive format for better display quality.
x
Interlace
: Disable the IP function. This mode is suitable for displaying motion pictures, but it increases
the chance of image retention.
Film mode
Choose to turn on or off the film mode frame conversion function.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
x
Auto
- Enable the film mode frame conversion function for movies and motion pictures. The display
converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this
function is enabled, it is recommended that you set the
Scan conversion
function to
Progressive
.
x
Off
- Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and
VCR signals.
IR control
Select the operation mode of the remote control when multiple BDL5545E displays are connected via an
RS232C connection.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
x
Normal
- All displays can be operated normally by the remote control.
x
Primary
- Designate this display as the primary display for remote control operation. Only this display
can be operated by the remote control.
x
Secondary
- Designate this display as the secondary display. This display can not be operated by the
remote control, and will only receive the control signal from the primary display via the RS232C
connection.
x
Lock
- Lock the remote control function of this display. To unlock, press and hold the
DISPLAY
button on
the remote control for 5 seconds.
Keyboard control
Choose to enable or disable the function of the keyboard (control buttons) on the display.
Press the
SET/PLUS
button to open the submenu, and then press the
PLUS
/
MINUS
button to toggle
between
