User Manual BDL5545E
45
4. Press the
PLUS
button to highlight the
OFF
item. Press the
UP
/
DOWN
button to set the hour when the
display will be turned off, then press the
PLUS
button to move to the minute slot to set the minute. If
you do not want to use a power off time, select "__" for the hour
slot and minute slot.
5. Press the
PLUS
button to highlight the
Input
item, and then press the
UP
/
DOWN
button to select an
input source. If no input source is selected, the input source will remain the same as the last selected
input.
6. Press the
PLUS
button to select what days in a week this schedule item will be take effect, and then
press the
SET
button.
7. If you want to set up more schedule items, press the
EXIT
button and then repeat the steps above. A
check mark in the box next to the number of the schedule item indicates that the selected schedule is in
effect.
Notes:
x
The selection of Every day within a schedule item takes priority over other schedules that are set up to
operate weekly.
x
When schedule items overlap, scheduled power on time has priority over scheduled power off time.
x
If there are two schedule items programmed for the same time, then the highest numbered schedule has
priority.
Monitor ID
Set the ID number for controlling the display via the RS232C connection. Each display must have an
unique ID number when multiple BDL5545E displays are connected.
Press the
SET/PLUS
button to open the submenu, and then press the
PLUS
/
MINUS
button to select a
monitor ID.
DDC/CI
Choose to turn
On
or
Off
the DDC/CI communication function. Select On for normal use.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to make
selection.
HDMI with One Wire
This function gives you the ability to control your display through the HDMI connector using
CEC(Consumer Electronics Control) commands.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to make
selection.
Smart power
Set the display to reduce the power consumption automatically.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
x
Off
x
Medium
x
High
Auto signal detection
Choose to let the display detect and display available signal sources automatically.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
to make selection.
x
ON
- Set the display to select the image automatically once a signal is connected.
x
OFF
- Once a signal is connected, it can only be selected manually.
