Philips BDL5545E User Manual Download

Page: 41 / 56

User Manual BDL5545E

4.2.6. CONFIGURATION 2 MENU

OSD turn off

Set the period of time the OSD menu stays on the screen. (from

120

seconds)

Press the

SET/PLUS

button to open the submenu, and then press the

PLUS

MINUS

button to adjust.

Information OSD

Set the period of time the information OSD displayed on the upper right corner of the screen. (from

seconds). The information OSD will display when input signal is changed.
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to adjust. The

information OSD will remain on the screen when

Off

is selected.

Sleep timer

Set the display to turn itself off to standby mode after the amount of time you specify. (

Off,1-24

hours from

current time)
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to adjust.

Note: When the Sleep timer is activated, Schedule settings will be disabled.

OSD rotation

Adjust the orientation of the OSD menu.
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to adjust

between 0, 90, 180, and 270 degrees.

OSD H-position

Adjust the horizontal position of the OSD menu.
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to adjust.

OSD V-position

Adjust the vertical position of the OSD menu.
Press the

SET/PLUS

button to open the submenu, and then press the

DOWN

button to adjust.

Display information

Displays the information about your display, including model number, serial number, operating hours and
software version.
Press the

SET/PLUS

button to view the information. Press the

EXIT

button to return to the previous menu.

Summary of Contents for BDL5545E

























































Search results

Summary of Contents for BDL5545E

Reviews:

Related manuals for BDL5545E

Brands by name

Popular brands

Philips BDL5545E, User Manual

Search results

Summary of Contents for BDL5545E

Reviews:

Related manuals for BDL5545E

Brands by name

Popular brands